Metal Roof Cost Calculator
Enter your roof area and metal type to see a published national cost range for planning purposes. All figures are estimates — local contractor quotes will reflect actual current pricing.
Inputs
Important: These are broad national ranges published by roofing cost guides as of June 2026. Sources: Western States Metal Roofing, This Old House, HomeGuide. Actual quotes may fall outside these ranges. Get 3+ local bids.
Metal Roof Cost by Type — 2026 National Ranges
| Metal Type | Cost/sq ft (installed) | 1,500 sq ft roof | 2,000 sq ft roof | 2,500 sq ft roof |
|---|---|---|---|---|
| Corrugated / exposed-fastener | $5–$12 | $7,500–$18,000 | $10,000–$24,000 | $12,500–$30,000 |
| Standing seam steel/aluminum | $9–$17 | $13,500–$25,500 | $18,000–$34,000 | $22,500–$42,500 |
| Metal shingles | $14–$24 | $21,000–$36,000 | $28,000–$48,000 | $35,000–$60,000 |
| Copper / premium | $20–$40 | $30,000–$60,000 | $40,000–$80,000 | $50,000–$100,000 |
National ranges published as of June 2026. Includes materials and installation labor. Excludes tear-off of existing roofing if applicable (add $1–$5/sq ft). Regional and complexity premiums apply — especially in high-cost-of-living areas.
Get Accurate Pricing: Next Steps
- Get at least 3 itemized quotes from licensed local roofing contractors.
- Ask each contractor to specify: material brand and gauge, labor rate, tear-off included or not, permit fees, and warranty terms.
- Check contractor licensing and insurance before signing anything.
- The cost ranges above are for planning only — they do not account for local labor market conditions, current material costs, or your specific roof's complexity.
Related Tools
- Roof Replacement Cost Calculator — asphalt shingle replacement ranges
- Roofing Calculator — calculate roof area, squares, and bundles
- Roofing Squares Calculator
Frequently Asked Questions
Based on nationally published data as of June 2026, installed metal roof costs range from approximately $5–$12/sq ft for corrugated/exposed-fastener metal to $9–$17/sq ft for standing seam steel or aluminum. Premium metals like copper run $20–$40/sq ft. Costs vary significantly by region, roof complexity, and current material prices — always get local quotes.
Metal roofs typically last 40–70 years depending on material type and maintenance. Standard architectural asphalt shingles last about 20–30 years. The higher upfront cost of metal can be offset by fewer replacements over a building's lifetime.
Whether metal roofing is cost-effective depends on how long you plan to stay in the home, your local climate, insurance discounts available in your area, and the contractor's labor rates near you. A local roofing contractor can give you a site-specific assessment.
The ranges shown here are installed costs (materials + labor). Labor typically represents 30–40% of the total for metal roofing. Always confirm what is included when getting quotes — tear-off of existing roofing, underlayment, and trim work can add cost.